Encoder/Hall Input

This is the input of SOLO for connection of Quadrature Encoders or Hall sensors, as can be seen below it provides a +5V supply for external usages. The digital inputs of this connector coming from Encoders or Hall sensors either can have 3.3V or 5V levels. The digital inputs are internally pulled-up to +5V with 1kΩ resistance to provide 5mA current for open drain/collector configurations.

Encoder/Hall Input 1
Encoder/Hall Input 2

Commercial/Spare Wires:

SOLO will be shipped with one wire for the Encoder/Hall connector, but you can also commercially purchase them from: